A fast setting tile grout for clinker and stone floor tiles. Also for exterior applications. Joint width 2-12 mm. Cementitious.
- easy to apply and quickly washable special tile grout for floor grouting
- good wear resistance, joint width 2–12 mm
- suitable for clinker and stone floor tiles both indoors and outdoors
- cementitious binder, 7 colours
- economical, 0.5 – 1.5 kg/m² depending on the size of the tile and joint
Kiilto Lattiasaumalaasti is a fast setting M1-classified tile grout for clinker and stone floor tiles. Designed for professional use. Kiilto Lattiasaumalaasti is suitable for joint width 2–12 mm and joint depth 3 mm at the minimum. Grouting can be done 5 h – 3 days after the tiling work (depending on the adhesive, the substrate and the prevailing conditions).
|Package Size||Color||EAN Code|
|3 kg||238 grey brown||6411513169032|
|10 kg||238 grey brown||6411513169100|
|3 kg||240 grey||6411513175033|
|10 kg||240 grey||6411513175101|
|20 kg||240 grey||6411513175200|
|3 kg||241 medium grey||6411513170038|
|10 kg||241 medium grey||6411513170106|
|20 kg||241 medium grey||6411513170205|
|3 kg||243 light grey||6411513171035|
|10 kg||243 light grey||6411513171103|
|20 kg||243 light grey||6411513171202|
|3 kg||244 dark grey||6411513173039|
|10 kg||244 dark grey||6411513173107|
|20 kg||244 dark grey||6411513173206|
|3 kg||248 coal grey||6411513174036|
|10 kg||248 coal grey||6411513174104|
|20 kg||248 coal grey||6411513174203|
|3 kg||250 black||6411513176030|
|10 kg||250 black||6411513176108|
|20 kg||250 black||6411513176207|
optimal application temperature: +18–20 °C,
the lowest application temperature +5 °C
≥ 2,5 MPa (EN 13888)
≥ 15 MPa (EN 13888)
typically 0.5 – 1.5 kg/m² depending on the size of the tile and joint
≤ 1000 mm3 (EN 13888)
compressive strength ≥ 15 MPa and flexural strength ≥ 2,5 MPa (EN 13888) after freeze-thaw cycles
joint width 2–12 mm and joint depth 3 mm at the minimum
10 weight parts of grout powder/ 2.3–2.5 weight parts of clean water
3 kg and 10 kg plastic pails, 20 kg bag
≤ 3 mm/m
Can be stored in unopened bags in dry conditions max. 9 months, and in plastic pails max. 15 months from the manufacture date.
binders: polymer and cement, aggregate: lime stone and quartz sand
<2 g/30 min, <5 g/240 min (EN 13888)
approx. 20-30 min. after adding water
Mixing: Kiilto Lattiasaumalaasti is poured gradually into cold, clean water using an electric stirrer. Let dissolve in water for 1–2 minutes and re-stir once again. The mix must be used within 20–30 minutes. Grouting: Spread the mortar with a rubber trowel diagonally over the joints by filling and strongly pressing the joints with mortar. Let dry until the mortar no longer sticks to fingers (usually for 15–30 min.) and then clean with a damp sponge. The drying time depends on the tile, substrate, joint dimensions and prevailing conditions. Too early cleaning or excess water may cause discolouring of joints. Dispose of dirty washing water regularly and replace with clean water to get more even joints and to minimise limescale. After the mortar has dried, clean the surface with a dry cloth or cotton waste. Moisten the joints with clean water (for example, by spraying) for 1–3 times during the first 24 hours to allow sufficient joint firmness. For seaming corners and inlets use Kiilto Saniteettisilikoni. Note! It is recommended that unglazed tiles are moistened before grouting. When installing porous tiles, test beforehand to see how the mortar washes off from the tile surface. Avoid colours that differ greatly from the colour of the tiling. When grouting soap rock or other porous materials, carefully follow the tile manufacturer's instructions. Not suitable for areas that are permanently under water (for example, swimming pools).
Typical material consumption (material loss not taken into account):
|tile size||joint width||joint depth||consumption|
|10 cm x 10 cm||3 mm||5 mm||n. 0,5 kg/m2|
|30 cm x 30 cm||3 mm||8 mm||n. 0,4 kg/m2|
Kiilto Lattiasaumalaasti is a cementitious product. Products that contain cement tend to produce water-based salts (so-called efflorescence) due to a chemical reaction. In certain circumstances, the salts may migrate to the surface of the product, making the colour lighter. Washing too soon after grouting, or excessive use of water when washing, increases the risk of efflorescence formation. Efflorescence is a natural phenomenon that cannot be fully prevented. However, it is a purely cosmetic issue and does not affect the product's performance.
Acidic cleaners may cause a deterioration in the cement used as a binder in tile grouts. When using acidic cleaners, follow up with an alkali cleaner to neutralise the surface.
Due to the manufacturing techniques of colour guides, a slight difference may occur between the colour in the guide and the finished joint. When grouting a room, make sure that all of your tile grout packages have the same batch number to ensure colour consistency.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.