The self-adhesive, plastic Kiilto Level peg is designed to indicate the thickness of a smoothing compound layer or thin straightening screed layer. Scale up to 65 mm.

Links

Materials

Application

Self-adhesive, flexible, plastic Kiilto Level peg is designed to measure the thickness of a smoothing compound layer or thin straightening screed layer applied either by pump or hand.

Remove any loose dust from the substrate to be levelled/cast. Kiilto Start Primer is used in most applications, see product specific instructions.

Instructions for use

Fasten self-adhesive Kiilto Level pegs on a primed surface that will be levelled or cast. We recommend using pegs at 1–2 metre intervals, depending on the size of the floor and the amount of the screed applied. The desired height of the layer is checked by a plane laser or builder's level, and the level pegs are cut to the required level.

 

Scale up to 65 mm 
Visible numbers 
Elastic plastic, easy to cut 
Package: 50 pc/package

 

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.