Kiilto KeraSafe +
Water- and vapour-tight KeraSafe foil for wet room waterproofing. Suitable with board and stone constructions.
Materials
+ 15 - 25 °C
> 1.5 mm (category 3)
approx. 325 g/m
approx. 0.5 mm
1 x 30 m
In unopened containers, above +1 °C, for 2 year.
Board substrate: 8 - 12% RH
Concrete- and levelling substrate:
< 85% RH M1000 when using Eco/Floor Plus
< 90% RH when using other fixing materials
Elastomer foil
PP fleece
W = 2,8 x 10ˉ¹² kg/(m²Pa)
Z = 2 620 000 s/m
Sd = 71 m
Kiilto KeraSafe+ is an elastic, water- and vapour-tight waterproofing foil. Temperature of the material, room and substrate must be normal when installing KeraSafe+ foil. Prevailing conditions such as air humidity and temperature significantly affect adhesion, drying time and the possible dimensional variation of the waterproofing foil. When installing the foil by using floor adhesive, the surface must be tiled within 72 hours after installation. Before starting the job, study the procedure guide.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For more information about the product and package disposal, visit www.kiilto.com.