Kiilto FP 1000
Kiilto FP 1000 is a one-component adhesive that gives a strong, yet slightly elastic bond. Does not contain isocyanates or solvents. Due to its thixotropic consistency, Kiilto FP 1000 is ideal for trowel application for walls and ceilings. The adhesive is fire classified according to IMO FTPC Resolution MSC.61 (67) Part 5 and has an MED certificate (Wheelmark). Adhesive has a CE marking and complies with the M1 Emission Classification for Building Materials. Kiilto FP 1000 is suitable for the gluing of e.g. ceramic or glass mosaic tiles on metal, PVC and concrete. The adhesive's strength complies with EN 12003 and EN 1348 standards after water resistance tests.
|Package Size||Product Code|
|Kiilto FP 1000 14 kg/10 l||T2454.010|
approx. 1.45 kg/dm³
3.5 N/mm² (DIN53504)
65 % (DIN53504)
approx. 30 min (20 °C, 50 % RH)
Grouting after 30 min - 2 h (20 °C)
300–1 000 g/m²
Protect from freezing, cured product is frost-proof.
Unopened at +10–25 °C for 6 months.
The surfaces to be bonded must be clean. Remove oxidations, grease and other impurities by using Kiilto Maalarinpesu, solvent or by sanding from the surfaces to be glued. When applying Kiilto FP 1000 tile adhesive on concrete, the relative humidity of the surface can be max. 90%. Apply the adhesive with a trowel or other application tool on one or both surfaces to be bonded. Remove fresh adhesive stains with a dry cloth and clean the surfaces with acetone or xylene. Hardened adhesive can only be removed by mechanical means. We recommend using adhesive at room temperature. However, the gluing can be carried out at lower temperatures (even at +5–10 °C), but the curing time will be much longer and spreading properties will suffer under these conditions.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. The result is strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.
Avoid unnecessary skin contact with and exposure to the fresh product: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.