Kiilto Cleaner 303

Surface cleaner prior to gluing.

Materials

Application

Kiilto Cleaner 303 is used for surface cleaning. Kiilto Cleaner 303 is a composition of solvents and effectively removes grease and dirt from different metal and plastic surfaces. Does not contain aromatic solvents. Kiilto Cleaner 303 is well suited for the cleaning of crude, galvanised or anodic metal surfaces. Can also be used for plastics, but always test on a small area before actual use. Suitable for cleaning fresh Kestopur and Kiiltoflex adhesive residue from glued surfaces and metal tools.

NOTE! Kiilto Cleaner 303 must not be used in automatic washes of glue spreading machines.

Package Size Product Code
*Kiilto Cleaner 303 200 l T3808.200
Kiilto Cleaner 303 5 l T3808.005
Density/specific weight

approx. 0.7 kg/l

Storage

Unopened at +10–25 °C for 36 months.

Instructions for use

Wipe the surface carefully with a damp, lint-free cloth. Wipe the surface with parallel, not rotating, strokes. Change to a clean towel when needed.

If you have to remove dirt or oxidants from the surface, or the surface is to be sanded before gluing, clean the surface before sanding. After sanding or grinding remove the dust carefully and clean the surface with Kiilto Cleaner 303 once more. Gluing can be done after the surface has dried, normally after 10 minutes at +20 °C.

Remove fresh adhesive residue with a dry cloth or paper, and finish with a lint-free cloth wetted with Kiilto Cleaner 303.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.