Kiilto Cleaner 300

Effective cleaner for two-component adhesive application equipment and nozzles.

Materials

Product Information
Application

Kiilto Cleaner 300 is a hydrophilic cleaner with semi-fast/slow evaporation properties. Kiilto Cleaner 300's special features are efficiency, low toxicity and high boiling point. It is used for the cleaning of nozzles and mixers of two-component PU-adhesive application equipment. Suitable also for removing fresh adhesive stains and splashes.

Package Size Product Code
Kiilto Cleaner 300 195 kg/200 l T5473.200
Kiilto Cleaner 300 20 kg/20 l T5473.020
Kiilto Cleaner 300 Schütz cont T5473.996
Technical Information
Type/binder

Solvent

Consistency

Clear, low viscous liquid

Density/specific weight

approx. 0.95 kg/dm³

Storage

Unopened at +10–25 °C for 18 months. Do not store in a fibreglass container.

Instructions and Safety
Instructions for use

Kiilto Cleaner 300 is used as it comes, with no thinning. For removing stubborn dirt, let the cleaner take effect longer on the surface. Parts to be cleaned can also be immersed in Kiilto Cleaner 300. Note that when using Kiilto Cleaner 300 for the cleaning of mixers of two-component PU-adhesives, the container must be of EPM rubber or polytetrafluoroethylene (e.g. Teflon®). Other materials may swell and brittle with time.
Note, the cleaner is reactive with the isocyanate hardener. In a case of very large amount of hardener in the cleaner, the reaction might be so vigorous that the mixture will heat up remarkably. The cleaner which has been used to rinse the production line is recommended to store in open vessel for 24 hours. If cleaner/ excessive hardener mixture contains also resin, the mixture starts to form expanding polyurethane foam.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.

Environment and safety

Avoid unnecessary skin contact with and exposure to the fresh product: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

Certificates
Key Flag