Kiilto A 200

Kiilto A 200 is a two-component, silyl modified, adhesive sealant for the gluing of metal and fiberglass in transport industry applications.

Special features

  • Good spreading properties
  • Does not contain isocyanates or solvents




Suitable for bonding fiberglass and metals in structural applications that require a long open time and quick-through curing, ideal for large adhesive surfaces. Elastic, yet a mechanically strong bond. Low viscosity. Long open time. Good resistance to chemicals (weak solutions). Almost odourless. Good resistance to weather.


2-Component silyl modified polymer

Density/specific weight

approx. 1.35 kg/dm³



Lap shear strength

- SS/SS 2.0 N/mm²

Tensile strength

1.2 N/mm² (DIN 53504)

Elongation at break

100 % (DIN 53504)

Mixing ratio

10 : 1 (weight part)


20.000 mPas (BrookField +20 °C)

Mixture viscosity

40 000 mPas (BrookField +20 °C)

Mixture colour

aluminium grey

Open time

60 min (23 °C/50 % RH)

Skin time

60 min (23 °C/50 % RH)

Curing through

1 day

Application temperature

+1–40 °C

Package sizes

200 l can

Temperature resistance when dry

-40–+90 °C


Unopened at +10–25 °C for 12 months.

Instructions for use

Materials to be glued must be dust-free, dry and free from grease and oil. We recommend wiping metal surfaces with Kiilto Cleaner 303 and priming with Kiilto Primer. Kiilto A 200 and Kiilto B 600 hardener are mixed in a ratio 10:1 (weight parts). The adhesive is spread one-sided and surfaces are pressed together. On large surfaces we recommend using e.g. a vacuum press. Uncured adhesive can be removed with xylene or acetone, cured adhesive only by mechanical means.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.

Environment and safety

Avoid unnecessary skin contact with and exposure to the fresh product: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit

M1 emission classification for building material
Key Flag