Kiilto Pro 96 Polar
Frostproof wood adhesive

A D2 classified universal adhesive suitable for woodwork, furniture installation and tongue-and-groove joints of parquet floors. The adhesive can withstand freezing up to a temperature of -40 °C and can be used normally once warmed up again. 

Special features

  • frost resistant 
  • suitable for adhesion of tongue-and-groove joints of parquet and laminate
  • can be stored in cold spaces
  • universal adhesive for woodwork and furniture installations
  • can be used on materials such as plywood, chipboard, cardboard, paper, foil, and leather
  • PVAc-based




Kiilto Pro 96 Polar -glue is a frost resistant PVAc-woodadhesive suitable for tongue and groove gluing of laminate and engineered parquet, fixture installations and self-assembly furniture. * opaque, light adhesive joint * adhesive’s viscosity is ideal for laminate tongue and groove joints * frost resistant * suitable both for chipboard as well as MDF and HDF based laminate floorings * moisture resistance class D2

Package Size EAN Code
0,75 l 6411511996753
Air humidity

50 % RH

Application temperature

+18…+20 °C


Approx . 15–20 m²/l depending of the size of tongue and groove bonds

Density/specific weight

approx. 1.0 kg/l

Package sizes

3/4 l


Unopened for 12 months. After long storing, stir before use.


PVAc -dispersion

Wood moisture content

8…12 %


approx. 5

Instructions for use

Follow the instructions given by the laminate and parquet manufacturer on storing, installation, substrate and substrate’s moisture. Remember to leave a clearance between the flooring material and fixed furnishings and walls. Cut the bottle nozzle to desired size and apply Kiilto Pro 96 Polar abundantly all the way in the groove joint along the long side and strip end. Tap the parquet strip immediately into position with a tapping block or a jemmy. Install one strip at a time and make inlets and holes according to instructions. Remove excess fresh adhesive with a clean, damp cloth. Let the joints dry at least 12 hours before using the floor and removing the spacer wedges. Room, material and adhesive temperature +18…+20 °C Wood moisture 8…12 % Air humidity 50 % RH

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit

Key Flag
The Nordic Swan Ecolabel