Kiilto 66 Yleis-/puuliima

Kiilto 66 is a PVAc-based multipurpose adhesive for wood, plywood, veneer, chipboard, paper, cardboard, fabric, leather and mosaic etc. Suitable also for fixture installation and tongue- and groove gluing of industrial parquet.

Special features

  • multipurpose adhesive for construction and homes
  • water-based

Materials

Application

A water-based PVAc multipurpose adhesive for gluing of wood, paper, cardboard, fabric and ceramics. Suitable for tongue- and groove gluing of industrial parquet. Complies with M1-emission classification for building products. The adhesive is fast-bonding and has a short pressing time. Kiilto 66 is a D2-adhesive suitable for indoor use.

Package Size EAN Code
0,33 l 6411511030334
0,75 l 6411511030754
3 l 6411511030303
10 l 6411511030112
Density/specific weight

Approx. 1 kg/dm³

Frost resistance

Freezing

Minimum film forming temperature

+ 5 - 8 °C

Open time

5 - 10 min

Package sizes

1/3 l and 3/4 l plastic bottle
3 l and 10 l plastic container

Pressing time

10 - 20 min (unstressed pieces)

Storage

In unopened containers, above +1 °C, for 12 months. After long storing, stir before use.

Viscosity

16500 mPas (Brookfield, RVT +20 °C)

Wood moisture content

6 - 15 %

pH

approx.7

Instructions for use

Apply the adhesive one-sided in an even layer. Position the pieces together and press. Pressing time depends on the prevailing working conditions. The adhesive joint is pale after drying. Remove fresh adhesive stains with a cloth moistened with water.

Carry out work at usually prevailing room temperature. Both the materials and adhesive should be allowed to reach the room temperature. Prevailing conditions, such as temperature of the room, adhesive and substrate, air humidity, substrate quality and humidity and the amount of adhesive affect significantly setting and drying time.

The adhesive does not stain wood. If the adhesive or substrate contain iron or rust, they, together with the wood extractive, may cause staining.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

M1 emission classification for building material
LEED
Key Flag