Kiilto Heavy Adhesive fir heavy wallcoverings
A multi-purpose wall adhesive with high dry solids content for hanging heavy wall coverings, including vinyl and textile wallpapers with paper, polyester and glass fibre backing, hessian and fibre glass woven coverings as well as grass and reed wallpapers.
- multi-purpose, high dry solids content
- suitable for hanging heavy wall coverings, grass and reed wallpapers
- 4-5 m²/l
- can be painted after 24 h of the gluing
Wall adhesive for hanging wall coverings in dry areas. Suitable for hanging hessian and glass fibre woven fabrics, grass, reed and textile wallpapers and vinyl wallpapers with paper, polyester and glass fibre backing. Not suitable for solid plastic materials. Has M1 Emission Classification for Building Materials.
|Package Size||EAN Code|
1 l, 5 l, 15 l
In unopened containers, above +1°C, for 18 months. After prolonged storage, stir before use. A partly used container must be used within a month.
wood: 8–12 %, concrete: max. 3 % by weight or below 85 % RH
PVAc-dispersion and modified starch
Absorbent substrate 15–20 min., painted surface max. 20 min. Note. Wet bonding! The amount of adhesive used, the substrate and prevailing conditions will all affect the working time considerably.
The surface must be dry, free from dust, clean, firm and even. Sand and wash painted surfaces with sodium and rinse carefully. Use damp-proof plaster for smoothing. If the surface is porous, first apply Kiilto 1 Seinäliima thinned with water. When working with fibreboard, apply the adhesive on wire surface.
Vinyl, grass and reed wallpapers with paper backing: Apply the adhesive to the back of the wallpaper using a paint roller, fold the lengths double and let the adhesive permeate for a few minutes. Hang the wallpaper to butt joint in the usual manner. Use Kiilto Boordiliima adhesive for possible lap joints.
Hessian and glass fibre woven fabrics, textile wallpapers, vinyl wallpapers with polyester and glass fibre backing: Apply the adhesive with a paint roller or trowel either to the wall to an area of 1–3 hides at a time, or to the back of the covering. Use the wet bonding method. Place the hides either to the butt joint or make the joint after attaching the hides to the wall using a knife. When hanging textile wallpaper with paper backing, in which the surface pattern is formed by parallel yarns, the adhesive must be applied to the wallpaper. Woven fabrics can be painted not less than 24 hours after hanging.
Remove fresh adhesive stains with a damp cloth or sponge and wash the equipment in lukewarm water.
When hanging wallpapers in which the textile surface pattern is formed by parallel yarns, the adhesive must be applied to the back of the wallpaper.
When hanging wallpapers in which the textile surface pattern is formed by cross yarns, the adhesive can be applied either to the wall or to the back of the wallpaper.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.