Kiilto MR 100
Kiilto MR 100 is a moisture barrier applied to the surface of spruce plywood.
Special featuresWater-based product giving temporary water resistant property to spruce plywood
The product is intended for surface impregnation of spruce plywood with application amount of minimum 100g/m². The product is suitable for spray, roller or brush application. The product is not intended to be treated later with stain or paint. The product is designed mainly for industrial application.
|Package Size||Product Code|
|Kiiilto MR 100 18 kg/20 l||T2489.020|
|Kiilto MR 100 Schütz cont||T2489.996|
11±2 sec (DIN CUP 4)
The product needs to be mixed before using. The machine and the equipment can be washed with warm water. Protect the product from freezing. The product is spread on a clean and dustless surface with a spray, brush or roller. The moisture content of spruce plywood before application should be below 13%.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.
Avoid unnecessary skin contact and exposure with the fresh product. Use safety gloves and goggles. Refer to a product specific material safety data sheet. For more information on product and package disposal, visit www.kiilto.com