Urea resin adhesive
Kestorit 390 is a powder urea-formaldehyde adhesive for hot and high frequency gluing such as veneering and form pressing.
|Package Size||Product Code|
|Kestorit 390 25 kg säkki||T3207.025|
urea-formaldehyde resin powder
approx. 0.55 kg/dm³
Kestorit 390 powder 150–180 parts by weight, water 100 parts by weight.
Mixture operating time 3–4 h (+20 °C)
15 - 20 min
100 - 150 g/m²
90 °C 4 min, 100 °C 3 min, 110 °C 2 min
In unopened containers, above +1 °C, for 6 months.
Add the adhesive powder into cool water, stirring it continuously. Let the mixture settle for 5-15 min. and stir once more. A higher temperature shortens the adhesive's pot life. The adhesive is recommended to be applied with a roll applicator machine. When using a manual roll applicator the adhesive must be applied as an even layer onto the whole surface. After pressing the boards need not be cooled, but the following work phases can be carried out immediately after the pressing.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.