Kestopress 2000
PVAc adhesive

Kestopress 2000 is a EN 204/D2 class PVAc wood adhesive for veneering and lamination.

Special features

  • 1 component
  • M1 classification




Kestopress 2000 is a PVAc-dispersion adhesive for veneering and lamination. Suitable for E1-classified furniture.

Package Size Product Code
Kestopress 2000 15 kg T1214.015
Kestopress 2000 kontti T1214.992

5.5 - 7.0


White, transparent after drying


11000 mPas (Brookfield, RVT +20 °C)

Open time

4 - 6 min. (90 g/m²)


veneering 80 - 120 g/m²
laminate gluing 120 - 150 g/m²

Compression pressure

0.3–0.5 N/mm

Working conditions

Board and veneer moisture: 6 - 12 %

Minimum film forming temperature

+15 °C

Air humidity

50 - 70 %


Unopened, above +1 °C, for 6 months. After long storing, stir before use.

Instructions for use

Recommended pressing temperature in veneering is max. 70 °C and in laminate gluing 60 °C. To make the cleaning of the gluing rollers easier, it is recommended that the rollers are moistened with water prior to gluing. Apply adhesive uniformly onto the board. Place the veneer or laminate onto the board and press together.

If the adhesive amount applied is bigger than the recommended one, there may occur adhesive break through.

Pressing times:


 Oak veneer:

(adhesive amount g/m²)

 Pressing temperature(°C)

 Pressing time (sec)
 90 20 300
 90 40 150
 90 55 80
 90 70 50


 High-pressure laminate (adhesive amount g/m²)

 Pressing temperature(°C)

 Pressing time (sec)
 140 20360 


 140 60120


Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit

M1 emission classification for building material
Key Flag