Kestokol S 90 P
PVAc adhesive
Kestokol 90 P is an EN 204/D2 durability class PVAC wood adhesive.
Special features
- 1-component
- 6 months storage time
- Fast
Links
Materials
Kestokol 90 P is a fast bonding PVAC dispersion adhesive. Kestokol S 90 P is suitable for sheet, assembly and edge jointing. As a D2-class adhesive Kestokol 90 P can be used for indoors in glued joints, which are in contact with water or moisture only for short periods of time.
Package Size | Product Code |
---|---|
Kestokol S 90 P 15 kg | T1250.015 |
5.5 - 7.0
White, transparent after drying
23000 mPas (Brookfield, RVT +20 °C)
2 - 4 min
120 - 180 g/m²
1 - 3 min
+7 °C
In unopened containers, above +1 °C, for 6 months. After long storing, stir before use.
Check that the joints fit well. Apply adhesive evenly on one side. Assemble and press the parts together aiming at an even squeeze out for the whole length of the joint. The jointss can be pressed in a cold, hot or high frequency press. The final strength of the bond is reached within 7 days.
If in contact with iron, some discolouration in the adhesive bond may occur.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.