Kestokol PT 20/S

Kestokol PT-20/S is a PVAC- based wood adhesive for doweling.

Special features

  • 1-component
  • 12 months storage time

Materials

Product Information
Application

Kestokol PT-20/S is a low viscosity PVAc-dispersion adhesive for doweling machines for wood industry. The adhesive is also suitable for hard wood gluing. As a D2 class adhesive Kestokol PT-20/S can be used indoors, in glued joints which are in contact with water or moisture only for short periods of time.

Package Size Product Code
Kestokol PT 20/S 15 kg T1415.015
Technical Information
Type/binder

PVAC-dispersion

pH

weakly acidic

Colors

White, after drying transparent

Viscosity

1300 mPas (Brookfield RVT, 3/50, 20° C)

Working conditions

Operating pressure range 7 - 16 bar

Minimum film forming temperature

+7 °C

Wood moisture content

6 - 15 %

Storage

In unopened containers, above +1 °C, for 12 months. After long storing, stir before use.

Instructions and Safety
Instructions for use

If possible, the container should be emptied at one time to the pressure vessel. Close a half-empty container carefully in order to avoid skin forming. After pauses in the work, clean the head of the nozzle so that the dried adhesive does not turn the adhesive spray away and cause an incomplete gluing result.

If the adhesive is in contact with iron or rust, this in combination with the tannic acid from the wood may cause wood discolouration.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

Certificates
M1 emission classification for building material
EN 204 D2 water resistance classification
Key Flag