Kestokol D 320 HF
EN 204/D3 adhesive
Kestokol D 320 HF is an EN 204 D3 classified PVAc- adhesive for wood.
Special features
- 1-component
- very fast in high frequency press
- long open time
Links
Materials
Kestokol D 320 HF is a D3 specially designed PVAc dispersion adhesive with a high film forming temperature for glued boards, form pressing and veneering. The adhesive is especially designed for use in hot and HF presses. The adhesive can be applied in the gluing of E1-classified or other low emission structures.
| Package Size | Product Code |
|---|---|
| Kestokol D 320 HF Schütz cont | T3440.996 |
PVAc
1,07 kg/l
3.2
24 hours + 45 °C / 90 % RH tensile strength is > 8 N/mm² (Class 5)
Watt 91 tensile strength is > 7.5 N/mm².
4500 mPas
10 minutes closed open time (Pine, 20 °C, 65 % RH, 150 g/m²)
14 minutes open time (Pine, 20 °C, 65 % RH, 150 g/m²)
70 - 130 g/m².
Pressing time is related to temperatures and power used with heated and HF press.
0.5 N/mm² recommended.
+ 20 °C
6 - 15 %
In unopened containers, above +1 °C, for 12 months. After long storing, stir before use.
Check that the joints fit well. Apply adhesive evenly on one side. Assemble and press the parts together aiming at an even squeeze out for the whole length of the joint. The joints can be pressed in a hot or high frequency press. The final strength and water resistance of the bond is reached within 7 days.
With some wood types the adhesive’s acidity may cause discolouration in the adhesive bond. If in contact with iron, some discolouration in the adhesive bond may also occur.
NOTE! Kestokol D 320 HF is not suitable for cold pressing. Kestokol D 320 HF adhesive reacts even with a small amount of urea formaldehyde adhesive (1 %) forming a thick sponge. For this reason the application equipment (pump, hoses, roller) need to be washed very carefully prior to using Kestokol D 320 HF adhesive.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.
Avoid unnecessary skin contact with and exposure to the fresh product: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.