Kestokol D 313/UV
EN 204/D3 adhesive

Kestokol D313 UV is an EN 204 D3 classified PVAC adhesive for wood.

Special features

  • 1-component
  • Storage time 5 months
  • Completely clear and colourless even on pine heartwood
  • Contains a tracer that is visible under UV-light 




Kestokol D 313/UV is a reactive PVAC dispersion adhesive, which results in a completely clear and colourless bond line with all wood types, and is well suited for massive wood, bathroom furniture, laminate gluing as well as for finger jointing. Due to its D3 durability class, Kestokol D 313/UV -adhesive can be used for interior applications that have frequent exposure to high humidity, or running or condensation water, or for exterior applications which are not exposed to weather.

Package Size Product Code
Kestokol D 313/UV 15 kg T2313.015
Kestokol D 313/UV IBC cont T2313.994
Kestokol D 313/UV kontti T2313.992



White, transparent when dry Glows under UV-light (100-390 nm).


5500 mPas (Brookfield, RVT +20 °C)

Open time

See instructions for use.


120 - 150 g/m²

Pressing time

15 min. (Pine, 12 % wood moisture, temperature 23 °C, 50 % RH)

Compression pressure

0,5 N/mm²

Minimum film forming temperature

+4 °C

Wood moisture content

6 - 15 %


In unopened containers, above +1 °C, for 5 months. After long storing, stir before use.

Instructions for use

Check that the joints fit well. Apply adhesive evenly on one side. Assemble and press the parts together aiming at an even squeeze out for the whole length of the joint. The joints can be pressed in a cold, hot or high frequency press. The final strength and water resistance of the bond is reached within 7 days.

The consumption affects the open time of the adhesive as follows (pine, 12 % wood moisture, 23 °C, 50 % RH):


  Consumption (g/m²) Open time (minutes)
 120 4
 150 7


Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit