Kestokol D 301

Kestokol D301 is an EN 204 D3 classified PVAC adhesive for wood.

Special features

  • 1-component
  • Storage time 12 months
  • Viscous

Materials

Application

Kestokol D 301 is a reactive PVAC dispersion adhesive, which is well suited for massive wood, parquet and bathroom furniture gluing as well as for foil lamination of wood based boards. Due to its D3 durability class, Kestokol D 301-adhesive can be used for interior applications that have frequent exposure to high humidity, or running or condensation water, or for exterior applications which are not exposed to weather.

Package Size Product Code
Kestokol D 301 15 kg T3822.015
Kestokol D 301 IBC cont T3822.994
Kestokol D 301 kontti T3822.992
pH

2.7

Colors

Light, transparent when dry

Viscosity

14000 mPas (Brookfield, RVT +20 °C)

Open time

See instructions for use.

Consumption

120 - 150 g/m²

Pressing time

20 min. (Pine, 12 % wood moisture, temperature 20 °C, 50 % RH)

Minimum film forming temperature

+3 °C

Wood moisture content

6 - 15 %

Storage

In unopened containers, above +1 °C, for 12 months.

Instructions for use

Check that the joints fit well. Apply adhesive evenly on one side. Assemble and press the parts together aiming at an even squeeze out for the whole length of the joint. The joints can be pressed in a cold, hot or high frequency press. The final strength and water resistance of the bond is reached within 7 days.

With some wood types the adhesive’s acidity may cause discolouration in the adhesive bond. If in contact with iron, some discolouration in the adhesive bond may also occur.

The consumption affects the open time of the adhesive as follows (pine 12 % wood moisture, 20 °C, 50 % RH):

 

  Consumption (g/m²) Open time (min)
 120 4
 150 12

 

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.