Kestokol D 300
EN 204/D3 adhesive

Kestokol D 300 is an EN 204 D3 classified PVAC adhesive for wood.

Special features

  • 1-component
  • Storage time 12 months
  • Foil coating of wood-based boards




Kestokol D 300 is a reactive PVAC-dispersion adhesive, well suited for solid wood, parquet, bathroom furniture, laminate as well as wood-based board foil coating applications. Due to its D3 durability class, Kestokol D 300 -adhesive can be used for interior applications that have frequent exposure to high humidity, or running or condensation water, or for exterior applications which are not exposed to weather.

Package Size Product Code
Kestokol D 300 100 kg T3422.100
Kestokol D 300 15 kg T3422.015
Kestokol D 300 IBC cont T3422.994
Kestokol D 300 Schütz cont T3422.996
Kestokol D 300 kontti T3422.992


Density/specific weight

1.05 kg/l




White, transparent after drying


8000 mPas (Brookfield, RVT +20 °C)

Open time

See instructions for use.


120 - 150 g/m² (solid wood)
80 - 100 g/m² (foil lamination)

Pressing time

20 min. (Pine, 12 % wood moisture, temperature 20 °C, 65 % RH)

Minimum film forming temperature

+3 °C

Wood moisture content

6 - 15 %


In unopened containers, above +1 °C, for 12 months. After long storing, stir before use.

Instructions for use

Check that the joints fit well. Apply adhesive evenly on one side. Assemble and press the parts together aiming at an even squeeze out for the whole length of the joint. The joints can be pressed in a cold, hot or high frequency press. The final strength and water resistance of the bond is reached within 7 days.

With some wood types the adhesive’s acidity may cause discolouration in the adhesive bond. If in contact with iron, some discolouration in the adhesive bond may also occur.

The consumption affects the open time of the adhesive as follows (pine 12 % wood moisture, 23 °C, 50 % RH):


 Consumption (g/m²) Open time(minutes)
 80 4
 100 5
 120 6
 150 10


Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit