Key Flag

Kestofol RH

Materials

Product Information
Application

Kestofol RH is a very fast-bonding dispersion adhesive developed for PVC and appropriately primed polyolefin foil profile coating on wood-based battens. Gives a high-quality, smooth surface.

Package Size Product Code
Kestofol RH 15 kg T1714.015
Kestofol RH IBC cont T1714.994
Technical Information
Type/binder

EVAC

pH

7

Viscosity

32.000 mPas (Brookfield RVT, 6/20, 20 °C)

Consumption

80–120 g/m

Application temperature

+18–+25 °C

Air humidity

50–60 %

Storage

In unopened containers at +20 °C for 12 months. After long storing, stir before use.

Instructions and Safety
Instructions for use

The open assembly time and the required pressing time strongly depend on the working conditions, such as room temperature, wood moisture and quality, absorbency and tensions in the material as well as the amount of adhesive applied. In order to determine the necessary pressing time and ensure the adhesive joint strength, adequate tests are to be carried out before use in full-scale production. A higher temperature shortens the required pressing time.
See the instructions given by the foil manufacturer. Substrates to be bonded must be free from dust, grease etc. Adhesive is applied on the foil with a knife coater or roller applicator. Water from the glue application is evaporated with the help of an evaporation tunnel and/or infrared radiator. The tacky, warm adhesive surface is pressed around the batten by pressure rollers.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. The result is strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.

Environment and safety

Avoid unnecessary skin contact with and exposure to the fresh product: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

Certificates
Key Flag