Kiilto Pro WRX 3071

Kiilto Pro WRX 3071 is an EN 204 D3 classified PVAC wood adhesive for veneering and lamination.

Special features

  • non-discoloring
  • very fast bonding
  • does not bleed through in veneering 
  • includes renewable raw materials

Links

Materials

Application

Kiilto Pro WRX 3071 is a very fast bonding reactive PVAc-dispersion adhesive with neutral pH. Suitable for veneering as well as foil lamination of solid wood, parquet, bathroom fixture, laminate and wood based boards with a hot press. Thanks to its D3 water resistance level, Kiilto Pro WRX 3071 is suitable for both interior and exterior applications that have repetitive short-term contact with water.

Package Size Product Code
Kiilto Pro WRX 3071 15 kg T1458.015
Kiilto Pro WRX 3071 IBC cont T1458.994
GREEN CONTENT, renewable and recycled material content

8%

Type/binder

PVAc

Consistency

PVAc

Density/specific weight

ca. 1,2 kg/dm³.

pH

7 - 8

Colors

Light colour, translucent when dry.

Viscosity

10 000 mPas (Brookfield RVT +20 °C)

Consumption

120–150 g/m² (solid wood)
80–100 g/m² (veneering and foil lamination)

Pressing time

Hot pressing, look at the table

Compression pressure

0,5 N/mm²

Working conditions

+10 - +30 °C

Minimum film forming temperature

+3 °C

Wood moisture content

6 - 15 %

Storage

Can be stored in unopened containers, above +1 °C, for 4 months. After long storing, stir before use.

Instructions for use

The adhesive should not be mixed with other PVAc adhesives, the production line must be cleaned before using this adhesive.

Check that the joints fit well. Apply adhesive one-sided in an even layer. Assemble and press the parts together aiming at an even squeeze out for the whole length of the joint. The joints can be pressed in a cold or hot press. The final strength and water resistance of the bond is reached within 7 days.

The open time of the adhesive depends on the amount of adhesive used (pine 12 % wood moisture, 23 °C, 50 % RH):


Amount of adhesive (g/m²) Open time (minutes)
802
1003
1204
1506

 Pressing time in veneering with adhesive amount 100 g/m²

Pressing temperature (°C)

Pressing time (sec) 
 60 60
 70 50
 80 40
Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.