Kiiltomelt PS 140

Kiiltomelt PS 140 is an EVAC-based hot-melt adhesive for profile coating.

Special features

  • M1 classified
  • Suitable for back reinforced veneer.

Materials

Product Information
Application

Kiiltomelt PS 140 is a profile coating hot-melt adhesive used especially for back reinforced veneer or different types of paper foils. Adhesive is compliant with M1 Emission Classification of Building Materials.

Package Size Product Code
Kiiltomelt PS 140 15 kg T7310.015
Technical Information
Colors

beige

Softening point

87 °C (DIN 52011)

Viscosity

13 000 mPas, 200 °C, 5 s¯¹

Working conditions

+18 - 22 °C

Application temperature

180 - 210 °C (on the applicator roll)

Package sizes

25 kg

Air humidity

60 - 70 %

Wood moisture content

7 - 10 %

Storage

In unopened containers, at max. +40 °C, for 36 months

Instructions and Safety
Instructions for use

The adhesive is melted in the adhesive tank. The recommended feed speed is 15–40 m/min. If the feed speed is lower than recommended, the adhesive temperature on the applicator roll must be raised in order to prevent the adhesive from cooling prematurely. For longer breaks in the work the adhesive temperature should be decreased, otherwise the adhesion and flowing properties of the adhesive may weaken.


Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.

Environment and safety

Avoid unnecessary skin contact with and exposure to the fresh product: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

Certificates
M1 emission classification for building material
Key Flag