Kiilto WSH Pintatasoite 1–2 mm

White, paintable fine plaster for smoothing walls and ceilings in dry and wet areas. The surface can be painted. Not suitable under tiling or waterproofing. Over plastering 1-2 mm. Cementitious.

Special features

  • white, paintable fine wall plaster with a cementitious binder
  • dry and wet rooms
  • drying time 1 d
  • over plastering 1–2 mm
  • coverage 1,3 kg/m²/mm

Materials

Application

Kiilto WSH is a fine plaster for smoothing indoor walls and ceilings. Suitable for plastering various rock material surfaces and gypsum boards in areas requiring wear resistance. The surface can be painted. Under tiling and waterproofing membrane we recommend e.g. Kiilto SK Märkätilatasoite, wall plaster for wet areas.

Package Size EAN Code
20 kg 6411512404202
Bond strength

> 0,5 MPa (EN 998-1)

Classifications and certificates

stress grading RL01...RL05 of paintable surfaces (The RYL Code of building practice 2012)

Colors

White

Compression strength

CSIV (EN 998-1)

Coverage

1 mm layer/m² solid matter weights approx. 1.3 kg

Curing rate

Approx. 1 d (+18 °C) (depending on prevailing conditions)

Layer thickness

over plastering 1-2 mm

Max. grain size

0.25 mm

Mixing ratio

6.5–7.0 l water / 20 kg plaster

Package sizes

20 kg bag

Storage

In an unopened package max. 1 year in dry conditions.

Substrate humidity

concrete < 90 % RH

Type/binder

polymer-cement-limestone -based powder

Working conditions

recommendation: +18–20 °C, lowest operating temperature +5 °C

Working time

3–4 hours (+18 °C)

Instructions for use

The surfaces to be plastered must be solid, clean and free from dust. Dry surfaces are moistened prior to plastering (not board surfaces). A new coat should not be applied until the previous one is dry. If needed, the surface should be carefully sanded and cleaned before applying a new plaster coat.

Strew Kiilto WSH powder slowly in cool (+18–20 °C), clean water constantly stirring until a smooth, even mass is formed. Let the mix mature for approx. 15 min and then remix once again. Apply the plaster by hand with a steel trowel or spray with a spraying gun for plasters. Also, the sprayed coat should be levelled by hand with a steel trowel.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

M1 emission classification for building material
CE marking
LEED
Key Flag