“Pulp thinner” is used for the thinning of nitrocellulose-based paints and varnishes and the cleaning of tools (see paint’s or lacquer’s instructions).
Very effective solvent against grease and other dirt. It is used also for the thinning of nitrocellulose-based paints and varnishes in brush and spray application.
|Package Size||EAN Code|
Lowest +15 °C
In unopened containers at +20 °C for 36 months.
Follow paint/varnish manufacturer's instructions and ensure the compatibility of toluene-free thinner. Might cause damage to certain painted surfaces or plastics. Due to the high evaporation rate, in unfavourable conditions (warm and humid air) Kiilto Tinneri may cause some whiteness on painted or lacquered surfaces: as the thinner evaporates, the temperature of the surface falls below the dew point and results in water condensation. Whiteness can be removed by brushing Kiilto Tinneri on the surface. Re-lacquering or painting can be done as soon as the prevailing conditions improve.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.