Kiilto Spezial
Parquet adhesive

A PVAc-based adhesive for laying mosaic parquet flooring and step sound insulation cork. Depending on the parquet type, suitable subfloors are sufficiently firm concrete, floor levelling compound or plywood.

Special features

  • for laying mosaic parquet flooring and step sound insulation cork




For laying mosaic parquet flooring and step sound insulation cork. Suitable to be used with underfloor heating. Has M1 Emission Classification for Building Materials.

Notching of trowel
Notching of trowel
Package Size EAN Code
15 l / 17 kg 6411511040159
Application temperature

+18–25 °C


approx. 1.7 m²/l, approx. 0.7 kg/m²

Density/specific weight

approx. 1.2 kg/l

Frost resistance

Freezing (adhesive joint is cold-resistant)

Open time

approx. 20 min (+20 °C, 50 % RH)

Package sizes

15 l


Can be stored in unopened containers, above +1°C, for 18 months. After long storing, stir before use.

Substrate humidity

concrete: max. 3,0 w-% or below 80 % RH
wood: 8–12 %



Instructions for use

Suitable substrates are steel-trowelled concrete, plywood, chipboard, cork board and wooden floor. The substrate must be dry, solid, smooth and free from dust and other materials that might impair adhesion. The concrete subfloor can be levelled with a mosaic parquet subfloor levelling compound produced by Kiilto Oy, if needed.

Carry out work at normal room temperature and humidity. Allow parquet boards and adhesive to acclimatize to normal room temperature and humidity. Apply the adhesive evenly with a notched trowel to an area that can be covered with parquet while the adhesive surface is still fresh. Press the parquet sheets onto the surface. Check that the back of the parquet is fully covered with adhesive. Leave a clearance of 10–15 mm between solid structures, e.g., wall and parquet. Sanding is recommended after 6 days at the earliest.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit

M1 emission classification for building material
Key Flag