Kiilto Silikoninpoisto silicone remover
Gel-like, ready-to-use silicone remover. Softens the hardened silicone and makes it easier to remove the silicone joint.
Special features
- ready-to-use silicone remover in a handy-pack with application tool included
- suitable for removing all types of silicones
Links
Materials
| Package Size | EAN Code |
|---|---|
| 100 ml | 6411513657102 |
100 ml plastic bottle with a built-in brush
In unopened containers, above +1°C, for 24 months.
First remove the old silicone sealant properly with, e.g., a sharp knife. Shake the bottle. Apply Kiilto silicone remover abundantly on the remains of the silicone sealant. Let take effect for 20–30 minutes. Remove the remains with, e.g., a wooden stick. Repeat, if needed. Finish by washing with water and soap and allow to dry.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.