Kiilto R Rollable ready-mixed plaster

Rollable ready-mixed plaster for smoothing dry walls and ceilings. Ideal for over plastering glass fiber wallpaper. Well suited also for fixing reinforcing tape on gypsum boards. Max. 3 mm layer. Water-soluble.

Special features

  • for smoothing painted glass fiber wallpaper
  • suitable also for fixing reinforcing tapes on gypsum board plates
  • for walls and ceilings
  • drying time 2–3 h/mm (max. layer thickness 3 mm per application)




Kiilto R is a water-based, ready-mixed rollable universal plaster for finishing walls and ceilings prior to painting or wallpapering. Suitable also for fixing and smoothing reinforcing tapes on gypsum board plates. We recommend painting the surface before wallpapering to help future removal. Complies with the requirements of EN 13963:2005 and EN 15824:2009 standards.

Package Size EAN Code
10 l 6411512913100
Bond strength

> 0,3 MPa (EN 15824)

Classifications and certificates

stress grading RL01...RL04 of paintable surfaces (The RYL Code of building practice 2012)


Light grey

Curing rate

approx. 2–3h/mm (+18 °C) (depending on layer thickness and prevailing conditions)

Density/specific weight

1.3 kg/l

Flexural strength

> 320 N (EN 13963)

Layer thickness

3 mm

Max. grain size

0.15 mm

Package sizes

10 l plastic container


In unopened containers, above +1 °C, for 1 year.


Polymer - light filler - limestone based plaster

Working conditions

normal room conditions, lowest operating temperature +10 °C

Instructions for use

The surfaces to be plastered must be clean, dry and free from dust. A new coat should not be applied until the previous one is dry. If needed, the surface should be carefully sanded and cleaned before applying a new plaster coat.

Kiilto R is a ready-mixed plaster. After long storing, stir before use. The product can be diluted with water, if needed. Apply the plaster with a long haired roller on the wall and then smooth with a steel trowel. When installing a reinforcement tape, first apply plaster into the joint with a roller. Then smooth the plaster with a steel trowel, and press paper reinforcing tape carefully onto the fresh plaster. Apply a second plaster layer over the tape and smooth by using a broader steel trowel. After drying the surface can be easily sanded.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For more information on product and package disposal, visit

M1 emission classification for building material
CE marking
Key Flag