Kiilto Pro Core Tile grout
A special tile grout for floors and walls. Does not contain components that form efflorescence. Easy and fast to make a uniform joint with an even colour.
- An anti-efflorescence, fast special tile grout for floor and wall tiles
- Suitable for grouting ceramic tiles and stones in residential and public spaces. For interior and exterior areas.
- Very economical, 0.3–1.5 kg/m² depending on the size of the joint and tile
- Joint width 2–12 mm, 8 colours
- For professional use
Kiilto Pro core is a fast setting tile grout for grouting ceramic tiles and stones in walls and floors. Designed for professional use. Kiilto Pro Core is suitable for joint width 2–12 mm and joint depth 3 mm at the minimum. Grouting can be done 5 h – 3 days after the tiling work (depending on the adhesive, the substrate and the prevailing conditions). Not suitable for areas that are permanently under water (for example, swimming pools).
|Package Size||Color||EAN Code|
|10 kg||410 traffic white||6411514296102|
|10 kg||439 marble white||6411514297109|
|10 kg||440 concrete||6411514290100|
|10 kg||441 stone||6411514291107|
|10 kg||443 pearl||6411514292104|
|10 kg||444 iron||6411514293101|
|10 kg||448 antracite||6411514294108|
|10 kg||450 graphite black||6411514295105|
recommendation: +18–20 °C, lowest operating temperature +5 °C
≥ 15 MPa (EN 13888)
typically 0.5 – 1.5 kg/m² depending on the size of the tile and joint
≥ 2.5 MPa (EN 13888)
compressive strength ≥ 15 MPa and flexural strength ≥ 2.5 MPa (EN 13888) after freeze-thaw cycles
joint width 2–12 mm and joint depth 3 mm at the minimum
5 weight parts of grout powder/ 1.2–1.3 weight parts of clean water
plastic pail, with 2 x 5 kg bags
≤ 3 mm/m
Kiilto Pro Core powder can be stored in unopened containers in dry conditions max. 15 months from the manufacture date.
Binders: cement and polymer; aggregate: limestone
<2 g/30 min, <5 g/240 min (EN13888)
approx. 30-45 min. after adding water
Mixing: Kiilto Pro Core powder is poured into cold, clean water using an electric stirrer (mixing ratio: 5 kg powder and 1.2 - 1.3 l clean water) and let dissolve in water for 1–2 minutes and re-stir once again. The mix must be used within 30-45 minutes. Grouting: Spread the mortar with a rubber trowel diagonally over the joints by filling and strongly pressing the joints with mortar. Let dry until the mortar no longer sticks to fingers (usually for 15–30 min.) and then clean with a damp sponge. The drying time depends on the tile, substrate, joint dimensions and prevailing conditions. Too early cleaning or excess water may cause discolouring of joints. Dispose of dirty washing water regularly and replace with clean water to get more even joints and to minimise limescale. After the mortar has dried, clean the surface with a dry cloth or cotton waste. Moisten the joints with clean water (for example, by spraying) for 1–3 times during the first 24 hours to allow sufficient joint firmness. For seaming corners and inlets use Kiilto Saniteettisilikoni.
Note! It is recommended that unglazed tiles are moistened before grouting. When installing porous tiles, test beforehand to see how the mortar washes off from the tile surface. Avoid colours that differ greatly from the colour of the tiling. When grouting soap rock or other porous materials, carefully follow the tile manufacturer's instructions.
Examples of grout consumptions (loss of material is not taken into account):
|tile size||joint width||joint depth||consumption|
|10 cm x 10 cm||3 mm||5 mm||approx. 0.5 kg/m2|
|30 cm x 30 cm||3 mm||8 mm||approx. 0.4 kg/m2|
Although the product itself does not form efflorescence, the water migrating in structures may contain salts that can accumulate to the surface of the seam as the water evaporates. But it is only a cosmetic imperfection, and does not affect the product’s performance in any way.
Acidic detergents may damage the cement used as a binder of the tile grout. When using them, neutralization with an alkaline detergent is recommended.
Due to the manufacturing technique of colour samples, there might be slight differences between the sample and the actual joint. To avoid colour difference, the grout bags should have the same lot number.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. To use the product properly, please read the product brochure, work instructions and the safety data sheet available at www.kiilto.com.
Kiilto Pro Core powder be stored in unopened containers in dry conditions max. 15 months from the manufacture date.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to the material safety data sheet. For information on product and package disposal, visit www.kiilto.com.