Kiilto Pikaliima Gel

Gel, non-dripping super glue for almost all materials, such as porcelain, metals, plastics, rubber, jewellery, wood and fabric, also for vertical surfaces. Not suitable for polyethylene and Teflon.

Materials

Product Information
Application

Kiilto Pikaliima Gel is suitable for the gluing of small surfaces, such as wood, cardboard and paper as well as many hard plastics, rubber, china and metal.

Package Size EAN Code
3 g 6411511794038
Technical Information
Air humidity

30-70 % RH

Application temperature

+18–20 °C

Consistency

gel

Coverage

1 drop / 5 cm²

Curing rate

5 sec–2 min. depending on the quality of the substrates and the amount of glue applied. Final strength after approx. 12 h.

Density/specific weight

1.05 kg/cm³

Storage

Unopened for 12 months. Lower temperature +5–10 °C lengthens the shelf life.

Temperature resistance when dry

-40–+100 °C

Type/binder

Ethyl-cyanoacrylate

Viscosity

30 000 mPas

Instructions and Safety
Instructions for use

Clean the surfaces to be bonded so that they are free from dirt, rust, oil, mould stripping agents etc. with a cloth moistened with acetone. Depending on the case, the surfaces can be roughened with a fine sandpaper before cleaning with solvent. Gently moisten porous surfaces such as porcelain and wood before gluing.

Unscrew the cap and nozzle of the tube. Puncture the film of the tube by pressing it with a pointed end on top of the tube. Re-screw the nozzle firmly. Apply a thin adhesive coat on one of the pieces and use the other piece for gently spreading the glue. Assemble immediately and press firmly together with fingers. Normally 5–30 sec pressing is enough, and the joined piece can be moved and processed further. Do not move the bond, until it has cured. Thin glue layer cures fastest and gives the maximum bond strength. Uncured glue can be removed with acetone. Cured glue can be softened with acetone, but removed only by mechanical means.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.