Kiilto M1000 Pro

Multi-purpose floor and wall adhesive with fast grab and excellent tack. Suitable for most types of coverings. 2-ethylhexanol-free.

Special features

  • long tack gluing time
  • good initial tack
  • fast bonding
  • strong bond
  • suitable both for porous and non-porous substrates
  • developed in collaboration with professional users
  • 2-ethylhexanol-free




Water-based floor and wall adhesive suitable for most types of vinyl and textile coverings as well as over 0.6 mm vinyl wall coverings on both porous and non-porous substrates in wet and dry areas. For LVT and linoleum we recommend Kiilto Floor Plus adhesive. Compatible with underfloor heating.

Notching of trowel
Notching of trowel
Package Size EAN Code
15 l 6411512174150
Application temperature

+18-25 °C


4-6 m²/l

Density/specific weight

1.15 kg/l

Frost resistance


Package sizes

15 l


In unopened containers, above +1 °C, for 12 months. After long storing, stir before use.

Substrate humidity

Concrete/levelling compound: max. 85 % RH
wood: 8-12 %


Acrylate copolymer

Working time

wet bonding: 0-15 min
late wet bonding: 15–30 min
tack gluing: 30-120 min (+23 °C, 50 % RH)

Instructions for use

Substrate must be dry, solid, level and free from dust and other materials that might impair adhesion. We recommend smoothing the concrete substrate with a suitable Kiilto low alkali levelling compound, which will reduce the risk of damage in the covering or adhesive due to excess alkaline moisture. Joints in board floors must be smoothed. If installing covering on building boards, follow the board manufacturer's instructions.

Stir the adhesive before use if needed and apply with a fine notched trowel or a roller. In absorbent substrates, use wet-gluing method: Press the covering immediately to the substrate and rub it tightly on. If the covering is stiff or must be bended, let the adhesive permeate with air for 10–20 minutes before pressing the covering to the substrate. If installing an impermeable covering on a totally non-absorbent substrate, let the adhesive permeate with air for as long as 40 minutes before pressing the covering onto the surface. Or alternatively, rub the covering gently onto fresh adhesive, then lift up and let permeate with air for 20–30 minutes. After that rub the length carefully onto the substrate. Remove fresh adhesive stains with water. Dried stains are removed with a strongly alkaline cleaner or xylene. Follow also the flooring manufacturer’s installation instructions.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined under standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Therefore, we cannot be held responsible for the final result. To use the product properly, please read the product brochure, work instructions and the safety data sheet available at

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to the material safety data sheet. For more information about the product and package disposal, visit

M1 emission classification for building material
Key Flag