Kiilto Cleaner 301

Cleaner for 1-component adhesive application equipment and nozzles.

Materials

Application

Kiilto Cleaner 301 is used for cleaning of PUR application equipment nozzles and other parts. Suitable also for cleaning of adhesive residue and splashes.

Package Size Product Code
Kiilto Cleaner 301 200 l/200 kg T2334.200
Kiilto Cleaner 301 5 l T2334.005
Consistency

Low viscous liquid

Density/specific weight

approx. 1.0 kg/dm³

Colors

Clear

Working conditions

Boiling point 213 °C, Flashpoint 91 °C

Storage

In unopened containers, above +1 °C, for 18 months. After long storing, stir before use.

Instructions for use

Use Kiilto Cleaner 301 as it is, no thinning. Let the cleaner take effect longer on the surface, if necessary. Parts to be cleaned can also be immersed in Kiilto Cleaner 301. NOTE! When using Kiilto Cleaner 301 for cleaning of polyurethane mixing equipment, the gasket material must be EPDM-rubber or polytetrafluoro ethylene (e.g. Teflon ®). Other gasket materials may swell or become brittle with time.

Do not pour product in the drain, but take it to municipal hazardous waste collection point.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test the product’s suitability for the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.