Kiilto Care curing and dust binding agent for floors

Water-based curing and dust binding agent ideal for floor screed floors. Suitable also as an anti-dust treatment for floors exposed to light traffic.

Special features

  • water vapour permeable foil 
  • very economical
  • no need for separate sanding prior to overall levelling    

Materials

Product Information
Application

Water-based curing agent especially designed for floating floor screed floors, e.g., dB-floors. Recommended also for other floor screed floors that will remain uncoated for longer times after levelling. If the relative humidity of the air is very low, the concrete floor will be prone to uneven curing and cracking. This is typical in heated spaces during the winter season. The use of curing agent is recommended, especially for one-way curing constructions. With curing agent the floor cures more evenly and thus the risk for distortion and cracking is lower. Good moisture resistance and the cement's alkalinity do not affect Kiilto Care's efficacy.
Suitable to be coated with commonly used floor coverings, such as cushioned vinyl, vinyl, textile, engineered wooden floors, laminate, clinker, stone, etc. Due to its permeability-reducing property, we recommend removing Kiilto Care by sanding prior to installing cork, linoleum and glue-down parquet.
Suitable also for concrete floors (Note! Removal of cement skin). Suitable for dust binding for screed or concrete floors that are exposed to light wear.
Floors treated with curing agent can be primed with diluted Kiilto Start Primer (1:4) and levelled, if needed.

Package Size EAN Code
5 l 6411512277059
Technical Information
Application temperature

Optimal +18–20 °C, minimum +10 °C

Classifications and certificates

M1

Colors

White

Coverage

Kiilto Care 1 l + water 2 l = 3 l -> 20–30 m²

Density/specific weight

1

Frost resistance

Freezing

Package sizes

5 l plastic container

Storage

In an unopened package max. 1 year in dry conditions.

Instructions and Safety
Instructions for use

Remove laitance, loose particles, dust and grease from the substrate. Mix Kiilto Care with water in a 1:2 ratio. The mixture can be applied on the floor the day following the levelling having been carried out. Apply in a thin layer with, e.g., a brush or rubber trowel. The floor is walkable after 30 minutes of the layer having been applied. Avoid Kiilto Care ponds.
Treatment with Kiilto Care somewhat retards the drying of the floor construction. Make a damp measuring to get a full status of the moisture conditions in the location.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. Lopputulokseen vaikuttaa merkittävästi myös työn suoritustapa. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

Certificates
M1 emission classification for building material
LEED
Key Flag