Akvatex 229 green
Water based contact adhesive

Akvatex 229 green is a 2-component sprayable contact adhesive for furniture upholstering.

Special features

  • Very good initial tack
  • Solvent-free
  • Unnoticeable bond




Akvatex 229 green is a 2-component sprayable contact adhesive for furniture upholstering.

Package Size Product Code
Akvatex 229 green 10 kg T2288.010

Waterbased special dispersion

Density/specific weight

1.11 kg /dm³ / 20° C


10-12/20° C


Green or colourless

Mixing ratio

Akvatex 229-adhesive 100 weight parts Akvatex-activator 10-15 weight parts


60 mPas (Brookfield RVT 2/100, 20°C)

Pot life

Open time 0 - 15 min.

Open time

0-15 min.


50–150 g/m²

Package sizes

15 kg

Temperature resistance when dry

+ 70° C


In unopened containers at +20 °C for 6 months.

Instructions for use

Apply using spray pressure equipment suitable for a 2-component product with a rotary jet nozzle of 1.0-1.6 mm 1.0 - 1.6 mm. Adhesive pressure 1.0 - 2.0 bar Spray pressure 1.2 - 2.5 bar Consumption 50 - 150 g/m² Activator pressure 0.8 - 1.5 bar Apply adhesive onto the two surfaces to be bonded. Press the surfaces together within the open assembly time. Requirements for the spraying equipment The adhesive congeals (thickens) very quickly when in contact with acids, salt and corrosive materials. To avoid any blockages in the spraying equipment, the following instructions should be noted: The metal parts in contact with the adhesive or activator must be made from acid-resistant steel (type 316). Materials such as aluminium, iron, copper or brass may cause problems. Plastic parts are recommended. The activator pump must be suitable for pumping acidic solutions. The adhesive will go lumpy upon contact with the air and a skin will form. Should air get into the equipment (e.g. when changing the adhesive or activator container), the equipment must be de-aerated (circulation). In addition, ensure that there is no air in the hose between the pump and the gun.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result The result is strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The user of the product must test product’s suitability to the intended application.

Environment and safety

Avoid unnecessary skin contact with and exposure to the fresh product: use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

Key Flag