You can add products to your checklist.
Water-based, ready-mixed paste for hanging paper wallpaper and paper-backed vinyl wallpaper in interior areas. For both manual and machine applications.
M1-classified, ready-mixed paste for hanging paper wallpapers on absorbent and painted surfaces. For both manual and machine application. Not for full plastic materials or plastic substrates.
|Package Size||1 l|
|Package Size||5 l|
|Package Size||10 l|
|Package Size||15 l|
1 l, 5 l, 10 l, 15 l
wood: 8–12 %, concrete: max. 3 % by weight or below 85 % RH
In unopened containers, above +1 °C, for 18 months. After long storing, stir before use. An opened container must be used within a month.
Carry out work at normal room temperature. Both the wallpaper and paste should be allowed to acclimatise to the room temperature. The surface must be dry, even, firm and clean. Remove old wallpapers and loose paint. Smooth and sand any irregularities. Prime or pre-paste highly absorbent substrates. Use a damp-proof matt primer paint or an adhesive thinned 1:1 with water for priming. Wash painted surfaces with, for example, Kiilto Maalarinpesu (painter's cleaner) and rinse well.
Follow the wallpaper manufacturer's instructions on installation. Apply paste evenly on the back of the wallpaper length. Fold both ends to meet in the middle with the paste side in and let wet for a couple of minutes. Unfold the upper end of the strip and start hanging from the ceiling line. Then unfold the lower half. Work from the middle towards the edges and brush out all bubbles. Avoid staining the wallpaper surface with the paste. Remove fresh adhesive stains immediately by pressing with a damp cloth or sponge. Vigorous rubbing may impair the colour or gloss of the wallpaper. Provide effective ventilation in the work area.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.