Checklist

  • You can add products to your checklist.

By emailing the checklist to yourself, you will receive the Product Brochure and Safety Data Sheet to your inbox in PDF format.

SubmitPrint

Kiilto Superfix DF Vaalea Saneerauslaasti

Dust-reduced, non-sagging, economical and flexible cementitious adhesive with lightweight filler for the laying of ceramic tiles. Ideal for large wall tiles. Prolonged open time. Also for exterior applications. C2TES1. C2ES2 with Kiilto Fixbinder

Special features

  • dust­reduced, lightweight filled, non-sagging
  • for setting ceramic tiles, glass mosaic, decoration stones and marble
  • suitable for outdoor use
  • C2TES1
  • grouting: walls 12 h, floors 24 h
  • coverage 1.5-2.2 kg/m²

Application

Non-sagging, economical and light cementitious adhesive for setting ceramic tiles and stones, which are not moisture-sensitive, on vinyl, paint, tile, clinker and common aggregate surfaces as well as on surfaces treated with Kiilto waterproofing membranes or Kiilto Kosteussulku moisture barrier, e.g., gypsum boards. Thanks to new technology the product produces almost no dust during the mixing process. Jointing can be done without a joint string. Suitable for interior and exterior use, but not for applications that are constantly under water (e.g., swimming pools).

The surfaces to be tiled must be clean and free from dust. Remove water-soluble smoothing and levelling compounds. Dry and absorbent surfaces must be moistened (excl. boards). Turn off floor heating approx. 24 hours prior to tiling. When tiling on vinyl, paint, tile and clinker substrates:

- ensure that the surface is solid and strong for tiling
- ensure that the surface to be tiled adheres properly to its own substrate
- remove wax, grease and dirt from the surface with Maalarinpesu cleaner and rinse well.
After the surface has dried, sand it, if necessary, and then remove the sanding dust.

Coverage

approx. 2.2 kg/m² applied with a standard notched trowel (notching: 6 mm x 6 mm x 6 mm)
approx. 1.5 kg/m² when applied with a mosaic trowel (notching: 4 mm x 4 mm x 4 mm). 4 mm).

Package Size

EAN Code

4 kg 6411512029054
15 kg 6411512029207
Package Size 4 kg
EAN Code 6411512029054
 
Package Size 15 kg
EAN Code 6411512029207
 

Type/binder

polymer-white cement-lightweight filler-quartz sand-based powder

Bond strength

above 1.0 MPa EN 1348

Mixing ratio

approx. 5.5 l water / 15 kg powder (walls)
approx. 6.5 l water / 15 kg powder (floors)

Open time

above 0.5 MPa / 30 min (EN 1346)

Classifications and certificates

C2TES1 (EN 12004), M1

Working time

working time approx. 3 hours after adding water

Application temperature

Optimal +18–20 °C, minimum +5 °C

Package sizes

4 kg plastic container, 15 kg bag

Substrate humidity

- concrete < 90 % RH

Frost resistance

Frost-resisting

Fire class

E

Coverage

approx. 2.2 kg/m² applied with a standard notched trowel (notching: 6 mm x 6 mm x 6 mm)
approx. 1.5 kg/m² when applied with a mosaic trowel (notching: 4 mm x 4 mm x 4 mm). 4 mm).

Max. grain size

0.5 mm

Deformation

above 2.5 mm (EN 12002)

Slip

below 0.5 mm (EN1308)

Storage

Unopened package in a dry place 1 year

Instructions for use

Strew powder slowly while stirring in cool, clean water until a smooth mass is formed. Let the mix mature for approx. 10–15 min. and then remix gently once. Apply the adhesive to the surface by pressing firmly and comb with a notched applicator an area that can be tiled within 15–20 minutes. Press the tiles firmly onto the surface and tap into position immediately. Adjustment time is 15 minutes. It is recommended to randomly lift tiles during the application to ensure sufficient coverage of tile backs (glazed tiles 70–75% and clinker 80–90%). When tiling outdoor areas, the coverage of tile backs must be 100 %. To make sure you get adequate coverage under the tiles, the trowel should be chosen according to the tile size and the tiling surface.

Remove fresh stains with water and a damp cloth. Dried mortar can only be removed by mechanical means. Walls can be jointed after 12 hours from tiling, floors after 24 hours. We recommend Kiilto tile grouts for jointing the tiles. Allow the tiling to dry for a week before proceeding to use as normal. Low temperature and high air humidity will retard the curing and drying process.

Edges of panel and board walls, joints between wall and floor tiling and other movement joints should be jointed with Kiilto Saniteettisilikoni.

By using additive (see Kiilto Fixbinder instructions), adhesive's deformation properties can be improved (CE marking C2ES2).

Suitable for correcting minor irregularities on the substrate prior to tiling. For corrections of several millimetres, we recommend Kiilto wall plasters and floor levelling compounds.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, go to www.kiilto.com.

M1CELEEDNordic EcolabelMade in Finland, Key flag