You can add products to your checklist.
Rollable ready-mixed plaster for smoothing dry walls and ceilings. Ideal for over plastering glass fiber wallpaper. Well suited also for fixing reinforcing tape on gypsum boards. Max. 3 mm layer. Water-soluble.
Kiilto R is a water-based, ready-mixed rollable universal plaster for finishing walls and ceilings prior to painting or wallpapering. Suitable also for fixing and smoothing reinforcing tapes on gypsum board plates. We recommend painting the surface before wallpapering to help future removal. Complies with the requirements of EN 13963:2005 and EN 15824:2009 standards.
|Package Size||10 l|
Polymer - light filler - limestone based plaster
> 0,3 MPa (EN 15824)
> 320 N (EN 13963)
approx. 2–3h/mm (+18 °C) (depending on layer thickness and prevailing conditions)
stress grading RL01...RL04 of paintable surfaces (The RYL Code of building practice 2012)
normal room conditions, lowest operating temperature +10 °C
10 l plastic container
In unopened containers, above +1 °C, for 1 year.
The surfaces to be plastered must be clean, dry and free from dust. A new coat should not be applied until the previous one is dry. If needed, the surface should be carefully sanded and cleaned before applying a new plaster coat.
Kiilto R is a ready-mixed plaster. After long storing, stir before use. The product can be diluted with water, if needed. Apply the plaster with a long haired roller on the wall and then smooth with a steel trowel. When installing a reinforcement tape, first apply plaster into the joint with a roller. Then smooth the plaster with a steel trowel, and press paper reinforcing tape carefully onto the fresh plaster. Apply a second plaster layer over the tape and smooth by using a broader steel trowel. After drying the surface can be easily sanded.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For more information on product and package disposal, visit www.kiilto.com.