Kiilto Pro R Marine
Silyl modified adhesive sealant

An adhesive for metals, glass fibre and different types of plastics particularly in the marine industry. One-component. Good resistance against weather and UV radiation. Paintable. Excellent adhesion.

Special features

  • Excellent adhesion, paintable, good resistance against weather and UV radiation
  • NSF registered: Can be used in areas where food is handled.
  • For gluing eg. cleats, hinges, fittings etc. to a boat hull
  • Coverage 5 x 5 mm joint, approx. 12 m/cartridge
  • Drying time 3 mm/d, approx. 10 mm/7 d
  • For indoor and outdoor use

Links

Materials

Application

It is suitable for different types of materials in demanding structural gluing applications. Kiilto R Marine is suitable for use with most metals, polystyrene, polyurethane, glass, glazed surfaces, epoxy and polyester fiber, stone and concrete. Complies with M1 emission classification for building materials. Fast bonding. Excellent adhesion to different materials - no need for priming in most cases. Does not contain isocyanates, PVC, tin catalyst or solvents. Almost odourless. Good resistance against detergent solutions (alkali and acid solutions), temporary resistance against fuels, mineral oils and vegetable oils. Excellent resistance against weathering and UV-radiation. Almost non-shrinking. Paintable with most water-based paints (test before use).

Package Size Color Product Code EAN Code
290 ml white T2445.926 6411512445298
600 ml white T2445.933 6411512445601
Application temperature

+1–40°C

Curing through

3 mm/d, approx. 10 mm/7 d (23 °C/50 % RH)

Density/specific weight

Approx.1.62 kg/l

Elongation at break

200 % (DIN 53504)

Hardness

Shore A 60

Lap shear strength

3.5 N/mm²

Skin time

approx. 10 min (23 °C, 50 % RH)

Storage

Unopened at +10–25 °C for 18 months.

Temperature resistance when dry

-40–+90°C

Tensile strength

2.2 N/mm² (DIN 53504)

Type/binder

Silyl modified polymer

Viscosity

approx. 2.5 million mPas (BrookField H-Path T-F/2.5 +20 °C)

Instructions for use

Materials being used must be dust-free, dry and free from grease and oil. When gluing large uniform surfaces or surfaces in very dry conditions, we suggest spraying lightly with water (approx. 5–10 g/m² ). We recommend cleaning the surfaces with Kiilto Cleaner 303 and priming with Kiiltoflex Metalliprimer. Uncured adhesive can be removed with xylene or acetone, cured adhesive only mechanically.

Additional information

The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. The result is also strongly affected by working methods. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. Ensure that the product is suitable for the intended application.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For more information on product and package disposal, visit www.kiilto.com.

M1 emission classification for building material
NSF food contact certification
LEED
Key Flag