Checklist

  • You can add products to your checklist.

By emailing the checklist to yourself, you will receive the Product Brochure and Safety Data Sheet to your inbox in PDF format.

SubmitPrint

Kiilto Premium extra strong fix

Elastic power glue for wood, concrete, stone and glass as well as different types of metals and plastics. Excellent initial tack. Solvent-free, does not contain isocyanates. Thermal resistance ranges -40–+100 °C. Salt water resistance. One-component.

Special features

  • Ultimate initial tack
  • Excellent thermal resistance
  • the lowest application temperature + 1 °C
  • moisture and chemical resistant
  • also for moist surfaces
  • suitable also for exterior use

Application

One-component KiiltoFix Premium is based on silyl polymer technology and has high bond strength. Suitable for fixing and sealing inside and outside. Ideal for applications which require high initial tack (cars, boats, mobile homes), fixing skirtings and building boards. Materials to be used must be free from dust, grease and oil. Good adhesion on various stones, concrete, most metals, wood, glass and glazed surfaces as well as epoxy and polyester surfaces. With plastic materials adhesive tests are recommended prior to actual use. Has M1-emission classification for building products. Solvent-free, does not contain isocyanates or phthalates. Paintable with most water-based paints (always test before use). Very good resistance against weathering, good resistance against UV light. Good resistance to chemicals (weak solutions). Salt water resistant. Not suitable for glazing.

Coverage

8.9 x 8.9 mm triangle shaped joint, approx. 7.3 m/cartridge

Package Size

Color

Product Code

EAN Code

290 ml white T2440.926   6411512440293
Package Size 290 ml
Color white
Product Code T2440.926
EAN Code 6411512440293
 

Type/binder

MS-polymer

Consistency

paste with high viscosity

Density/specific weight

approx. 1.6 kg/l

Lap shear strength

SS/SS 2 N/mm²

Tensile strength

2.2 N/mm² (DIN 53504)

Elongation at break

350% (DIN 53504)

Hardness

Shore A 60

Shrinkage

approx. 2 %

Skin time

approx. 10 min (23 °C, RH 50 %)

Curing rate

3 mm/d, approx. 10 mm/7 d (23 °C/50 % RH)

Application temperature

+1–40 °C

Package sizes

290 ml

Coverage

8.9 x 8.9 mm triangle shaped joint, approx. 7.3 m/cartridge

Max. joint distortion

± 25 %

Storage

Unopened at +10–25 °C for 12 months.

Instructions for use

Cut tip of the cartridge and place the nozzle. KiiltoFix Premium is applied with a hand or battery gun. Note! Consider product’s high viscosity, when choosing the application gun. Apply in stripes. Ensure that the surfaces to be sealed/bonded are clean before applying adhesive. Close the package carefully after use. Uncured product can be removed with xylene or acetone. Cured product can be removed only mechanically. Prevailing conditions such as air temperature, air humidity, substrate’s material and humidity as well as the amount of adhesive applied have a strong impact on the skin time and drying.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For more information on product and package disposal, visit www.kiilto.com.

M1LEED