Checklist

  • You can add products to your checklist.

By emailing the checklist to yourself, you will receive the Product Brochure and Safety Data Sheet to your inbox in PDF format.

SubmitPrint

Kiilto Pikaliima Gel

Gel, non-dripping super glue for almost all materials, such as porcelain, metals, plastics, rubber, jewellery, wood and fabric, also for vertical surfaces. Not suitable for polyethylene and Teflon.

Application

Kiilto Pikaliima Gel is suitable for the gluing of small surfaces, such as wood, cardboard and paper as well as many hard plastics, rubber, china and metal.

Coverage

1 drop / 5 cm²

Package Size

EAN Code

3 g 6411511794038
Package Size 3 g
EAN Code 6411511794038
 

Type/binder

Ethyl-cyanoacrylate

Consistency

gel

Density/specific weight

1.05 kg/cm³

Viscosity

30 000 mPas

Curing rate

5 sec–2 min. depending on the quality of the substrates and the amount of glue applied. Final strength after approx. 12 h.

Application temperature

+18–20 °C

Air humidity

30-70 % RH

Temperature resistance when dry

-40–+100 °C

Coverage

1 drop / 5 cm²

Storage

Unopened for 12 months. Lower temperature +5–10 °C lengthens the shelf life.

Instructions for use

Clean the surfaces to be bonded so that they are free from dirt, rust, oil, mould stripping agents etc. with a cloth moistened with acetone. Depending on the case, the surfaces can be roughened with a fine sandpaper before cleaning with solvent. Gently moisten porous surfaces such as porcelain and wood before gluing.

Unscrew the cap and nozzle of the tube. Puncture the film of the tube by pressing it with a pointed end on top of the tube. Re-screw the nozzle firmly. Apply a thin adhesive coat on one of the pieces and use the other piece for gently spreading the glue. Assemble immediately and press firmly together with fingers. Normally 5–30 sec pressing is enough, and the joined piece can be moved and processed further. Do not move the bond, until it has cured. Thin glue layer cures fastest and gives the maximum bond strength. Uncured glue can be removed with acetone. Cured glue can be softened with acetone, but removed only by mechanical means.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.