You can add products to your checklist.
Rapid super glue with a brush is ideal for the gluing of hard materials such as metals, plastics, rubber and ceramics. Not for porous materials such as wood or paper, polyethylene or Teflon. Easy to use, built-in brush.
Kiilto Pikaliima siveltävä super glue with a brush is ideal for the gluing of hard materials such as metals, most plastics, rubber and ceramics. Not for porous materials such as wood or paper, polyethylene, Teflon or windscreens.
1 drop / 5 cm²
|Package Size||5 g|
5 sec–2 min., depending on surface material and adhesive amount.
Temperature +18–+20 °C, air humidity 30–70 % RH
1 drop / 5 cm²
Remove all dirt, rust, oil, cast release agent etc. with a cloth moistened with acetone. If needed, surfaces can be sanded lightly before cleaning with solvent.
Open the bottle and spread a thin and uniform layer of adhesive with the built-in brush application on one of the surfaces only. Assemble the pieces together and immediately press the surfaces together with fingers.
Hold in place for 10 to 30 seconds before further processing. The final strength is reached approx. after 12 h. Do not reposition parts until the bond is fully cured. Excess glue extends bonding time and decreases bond strength. Uncured adhesive can be removed with acetone. Cured adhesive can only be removed by mechanical means (acetone may only soften the bond).
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.