• You can add products to your checklist.

By emailing the checklist to yourself, you will receive the Product Brochure and Safety Data Sheet to your inbox in PDF format.


Kiilto Pikaepoksi

Rapid, two-component epoxy glue for the bonding of, e.g., steel, iron, light metals, glass, porcelain, stone and wood. Good resistance to chemicals.


Kiilto Pikaepoksi is a solvent-free, fluid, two-component epoxy glue for the bonding of iron, steel, aluminium, brass, noble metals, wood, glass, porcelain, stone, concrete, many hard plastics, leather, rubber and rigid foamed plastics, and even cellular polystyrene.

Package Size

EAN Code

28 g 6411511282283
Package Size 28 g
EAN Code 6411511282283


epoxy resin

Density/specific weight

1.15 kg/dm³ (mixture)

Mixing ratio

One part resin by volume : one part hardener by volume.
Minor deviations from this ratio do not affect adhesive’s properties.

Curing rate

10–15 min. (+20 °C)

Working time

4–5 min. (2–3 ml mixture/+20 °C)

Pressing time

10-15 min./ 20 °C

Application temperature

+18...+20 °C

Package sizes

Double syringe dispenser, 2 x 14 g

Air humidity

below 80 % RH

Frost resistance



Can be stored, preferably in an upright position, in a tightly closed original container in a cool place, not below +1 °C, max. 24 months.

Instructions for use

The surfaces must be dry and free of grease. Sanding of the surfaces improves adhesion. Grease can be removed with acetone. Mix equal amounts of resin and hardener. Pot life of the mix is 4–5 minutes at +20 °C. Mix the components properly, e.g., with a wood stick on a cardboard piece. Glue is applied two-sided or one-sided provided that the surfaces, when pressed together, are so close in contact with each other that even the non-applied surface is wetted properly. Fit the pieces together immediately. Usually no pressing is needed. Keep the pieces in place using some sort of temporary fixing until the glue has cured (approx. 10 min. at +20 °C). Final bond strength is reached approx. after 12 hours. The lid of the resin and hardener nozzles is designed so that it fits in one position only, thus preventing the formation of glue gobs in the nozzles. Kiilto Pikaepoksi is not suitable for the bonding of vinyl or polyolefin plastics or when coming into contact with hot water. Fresh glue stains can be removed with a scraper or wiped off with a cloth. A cloth moistened with acetone removes fresh glue completely. Cured glue can only be removed by mechanical means.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit