You can add products to your checklist.
Multi-purpose adhesive for installing vinyl flooring and tiles, linoleum, rubber and textile flooring and PVC-free floor coverings. Suitable also for installing Kiilto KeraSafe foil. 2-ethylhexanol-free. Does not contain APEO-compounds, phthalates or other plasticisers. Also for wet room areas.
Water-based, acryl-dispersion adhesive for installing vinyl floorings and tiles, linoleum, rubber- and foam-backed textile flooring, and thick, over 0.6 mm, vinyl wall coverings on both porous and non-porous substrates in wet and dry areas. Suitable with underfloor heating and also for installing Kiilto KeraSafe foil. Has M1 Emission Classification for Building Materials.
|Package Size||1 l|
|Package Size||3 l|
|Package Size||10 l|
|Package Size||15 l|
wet bonding: 0–20 min.
late wet bonding: 10–30 min.
tacky gluing: 30-60 min.
1 l, 3 l, 10 l, 15 l
concrete: max. 85 % RH
wood: 8–12 %
In unopened containers, above +1°C, for 18 months. After long storing, stir before use.
Substrate must be dry, solid, smooth and free from dust and grease. We recommend smoothing the concrete substrate with a suitable Kiilto low-alkali levelling compound, which reduces the risk of damage in the covering or adhesive due to excess alkaline moisture. Joints in board floors must be smoothed. If installing the covering on building boards, follow the board manufacturer's instructions.
Stir the adhesive before use, if needed, and apply with a fine notched trowel or a roller. Use the wet-gluing method. Press the covering immediately to the substrate and rub it tightly on. If the covering is stiff or if it must be bended, let the adhesive permeate with air for 10–20 minutes before pressing the covering to the substrate. If installing an impermeable covering on a totally non-absorbent substrate, let the adhesive permeate with air for as long as 60 minutes before pressing the covering onto the surface. Alternatively, rub the length into fresh adhesive, lift up and let permeate with air for 20–30 minutes. After that, rub the length carefully onto the substrate. Remove fresh adhesive stains with water. Dried stains are removed with a strongly alkaline cleaner or xylene. Follow also the flooring manufacturer's installation instructions.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.