Checklist

  • You can add products to your checklist.

By emailing the checklist to yourself, you will receive the Product Brochure and Safety Data Sheet to your inbox in PDF format.

SubmitPrint

Kiilto LM Kevyttasoite

Lightweight plaster for finishing walls and ceilings in dry areas prior to painting and wallpapering. Suitable also for fixing and smoothing reinforcing tapes to gypsum board plates. Maximum layer thickness in over plastering 3 mm, in holes 5 mm. Water-soluble.

Special features

  • lightweight plaster for interior walls and ceilings
  • lightweight plaster for interior walls and ceilings
  • over plastering max. 3 mm layer, in holes max. 5 mm
  • lightweight plaster for interior walls and ceilings
  • drying time 2–3 h/mm
  • lightweight plaster for interior walls and ceilings
  • suitable for fixing reinforcing tapes to gypsum board plates
  • lightweight plaster for interior walls and ceilings
  • suitable for painting and wallpapering

Application

Kiilto LM is a water-soluble, ready-mixed lightweight plaster. Suitable also for fixing and smoothing reinforcing tapes to gypsum board plates. Provides suitable surface for painting and wallpapering. We recommend painting the surface before wallpapering to aid future removal. Complies with the requirements of EN 13963:2005 and EN 15824:2009 standards.

Package Size

EAN Code

3 l 6411512137032
10 l 6411512137100
Package Size 3 l
EAN Code 6411512137032
 
Package Size 10 l
EAN Code 6411512137100
 

Type/binder

Polymer - light filler - limestone based plaster

Density/specific weight

1,1 g/ml

Colors

Light grey

Bond strength

> 0,3 MPa (EN 15824)

Flexural strength

> 320 N (EN 13963)

Curing rate

approx. 2-3 h/mm (+18 °C) (depending on layer thickness and prevailing conditions)

Classifications and certificates

stress grading RL01...RL04 of paintable surfaces (The RYL Code of building practice 2012)

Working conditions

normal room conditions, lowest operating temperature +10 °C

Package sizes

3 l, 10 l plastic container

Fire class

A2-s1, d0 (EN 13963)

Layer thickness

3 mm, in holes 5 mm

Max. grain size

0.15 mm

Storage

In unopened containers, above +1 °C, for 1 year.

Instructions for use

The surfaces to be plastered must be clean, dry and free from dust. A new coat should not be applied until the previous one is dry. If needed, the surface should be carefully sanded and cleaned before applying a new plaster coat.



Kiilto LM is a ready-mixed lightweight plaster. After prolonged storage, stir before use. If necessary the product can be diluted with water. The plaster is applied with a steel trowel.



When fixing reinforcing tapes, apply the plaster in joint and press the paper tape firmly in the plaster. Smooth the joint by applying a second plaster layer using a broader steel trowel. After drying the surface can be easily sanded.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

M1CELEEDMade in Finland, Key flag