• You can add products to your checklist.

By emailing the checklist to yourself, you will receive the Product Brochure and Safety Data Sheet to your inbox in PDF format.


Kiilto LH Pintatasoite 1–2 mm

Adhesive based wall plaster for dry indoor walls and ceilings. Max. layer thickness in over levelling 2 mm.

Special features

  • with adhesive binder, white
  • dry areas
  • wall and ceiling surfaces
  • drying time 1 d
  • over plastering 1–2 mm
  • coverage 1,2 kg/m²/mm


Kiilto LH is an adhesive based wall plaster for dry indoor wall and ceiling surfaces. Suitable also for spray plastering of ceilings. Rough surfaces have to be plastered first with Kiilto TT, Kiilto SK or Kiilto LK –wall plasters, depending on the filling need. The finished surface can be painted or furnished with wallpaper. Painting the surface is recommended before wallpapering. Not suitable under ceramic tiles and wall vinyl.


1 mm layer/m² solid matter weights approx. 1.2 kg

Package Size

EAN Code

20 kg 6411512150208
Package Size 20 kg
EAN Code 6411512150208


Polymer-limestone -based powder



Bond strength

> 0,3 MPa (EN 15824)

Mixing ratio

7.0-7.5 l water / 20 kg bag

Curing rate

Approx. 1 d (+18 °C) (depending on prevailing conditions)

Working time

approx. 24 hours (+18 °C)

Working conditions

recommendation: +18–20 °C, lowest operating temperature +10 °C

Package sizes

20 kg bag

Substrate humidity

concrete < 90 % RH


1 mm layer/m² solid matter weights approx. 1.2 kg

Layer thickness

1-2 mm

Max. joint distortion

stress grading RL01...RL03 of paintable surfaces (The RYL Code of building practice 2012)

Max. grain size

0.25 mm


In an unopened package max. 1 year in dry conditions.

Instructions for use

The surfaces to be plastered must be clean, dry and free from dust. A new coat should not be applied until the previous one is dry. If needed, the surface should be carefully sanded and cleaned before applying a new plaster coat.

Strew Kiilto LH powder slowly in cool (+18 °C), clean water constantly stirring until a smooth, even mass is formed. Let the mix mature for approx. 15 min and then remix once again. Apply the plaster by hand with a steel trowel or spray with a spraying gun for plasters. Also, the sprayed coat should be levelled by hand with a steel trowel. If left over plaster is saved for the next day, the container should be covered carefully to avoid drying.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit

M1CELEEDNordic EcolabelMade in Finland, Key flag