Kiilto Pro Kerafix
Ceramic tile adhesive
A damp-proof adhesive for laying ceramic tiles on wall surfaces.
Special features
- light colour
- easy to use
- ready-to-use
- light odour
Links
Materials
Suitable for laying ceramic tiles on interior wall surfaces. Kiilto Kerafix is also suitable for gluing polystyrene and PU foam sheets. Not suitable for tilings that are in continuous contact with water.
| Package Size | EAN Code |
|---|---|
| 1 l | 6411511026016 |
| 3 l | 6411511026030 |
| 10 l | 6411511026108 |
+18–25 °C
1–2 m²/l substrate, depending on notching and tile size
1.45 kg/l
Freezing (frost-resistant adhesive joint)
1 l, 3 l, 10 l
In unopened containers, above +1°C, for 18 months. After long storing, stir before use.
concrete: max. 4 % by weight or below 90 % RH
Styrene acrylate dispersion
10–20 min. depending on the prevailing conditions
Suitable substrates are concrete, masonry and smoothed surface as well as cement-based board or gypsum board. The surface must be dry, firm and free from dust as well as stable (correct skeletal structures). The ceramic tiles can also be glued onto old tile surfaces or hard plastic covering: in this case, allow the adhesive to dry for 5–7 days after tiling before starting the grouting work. The old tile surface and plastic covering must be washed with Kiilto Laattapesu. The plastic covering must also be roughened to ensure adhesion.
Apply the adhesive to the surface using a smooth trowel and smooth down with a notched trowel. Press the tiles onto the surface without delay. The minimum joint width is 2 mm. The position of the tile and the sheet can be adjusted within 15 minutes of the installation. Grouting can be done 24 hours after gluing at the earliest. If the substrate is non-absorbent, grouting can be done not earlier than 5–7 days after gluing. Do not try to accelerate the drying via artificial means.
The information given in this product data sheet is based on our tests and our practical knowledge. The technical data is defined in standard conditions. Variations in local working conditions and methods will affect the product performance and result. We guarantee the high quality of our products according to our Quality Management System. No liability can be accepted from incorrect use of the product or prevailing conditions, over which we have no control. Thus, we cannot be held responsible for the final result. The correct use of the product presupposes that the user has made him/herself aware of the contents of the working instructions and procedure guide, if provided.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.