You can add products to your checklist.
Water based, ready-mixed joint plaster for fixing reinforcing tapes to gypsum board plates and levelling interior walls and ceilings in dry areas. Tape can be fixed by hand or machine. Suitable also for finishing the substrate prior to wallpapering or painting. Max. 2 mm
Kiilto J is a water-soluble ready-mixed joint plaster for fixing reinforcing tapes to gypsum board plates and levelling interior walls and ceilings in dry areas. Suitable also for finishing the substrate prior to wallpapering or painting. The finished surface can be levelled, painted or furnished with wallpaper. We recommend painting the surface before wallpapering to aid future removal. Complies with the requirements of EN 13963:2005 and EN 15824:2009 standards.
|Package Size||3 l|
|Package Size||10 l|
Polymer-limestone -based plaster
> 0,3 MPa (EN 15824)
> 320 N (EN13963)
Approx. 1-2 h/mm (+18 °C) (depending on prevailing conditions)
stress grading RL01...RL04 of paintable surfaces (The RYL Code of building practice 2012)
normal room conditions, lowest operating temperature +10 °C
3 l, 10 l plastic container
A2-s1, d0 (EN13963)
< 0,2 mm
In unopened containers, above +1 °C, for 1 year.
The surfaces to be plastered must be clean, dry and free from dust. A new coat should not be applied until the previous one is dry. If needed, the surface should be carefully sanded and cleaned before applying a new plaster coat.
Kiilto J is a ready-mixed joint plaster After prolonged storage, stir before use. If necessary the product can be diluted with water.
Fixing of reinforcing tapes: Apply the plaster in joint and press the tape firm in plaster with a narrow steel trowel. After that smooth the joint by applying plaster over the reinforcing tape using a broad steel trowel. After drying the surface can be sanded, if necessary. If the board edges are not thinned, smooth the plaster evenly outside the joint edges to have a smooth finish. In this case also the edges of the gypsum board should be chamfered. Reinforcing tape can also be fixed to gypsum board with a special plaster machine. Check also the gypsum board manufacturer's instructions.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.