You can add products to your checklist.
A multipurpose flooring adhesive for almost all types of floorings. Due to good tack and high final strength, Kiilto Floor Plus is ideal for LVT tiles. 2-Ethylhexanol-free, does not contain any APEO-compounds, phthalates or plasticizers.
A water-based floor and wall adhesive for vinyl floorings and -tiles, linoleum, rubber and textile floorings and thick, over 0.6 mm, vinyl wall coverings on both porous and non-porous substrates in wet and dry areas. Due to high final strength and strong bond, Kiilto Floor Plus is ideal for LVT tiles. Can be used with underfloor heating.
|Package Size||15 l|
wet bonding: 0–20 min
late wet bonding: 20-60 min
tack gluing: 60-120 min (23 °C, 50 % RH)
concrete: max. 85 % RH
wood: 8–12 %
In unopened containers, above +1°C, for 12 months. After long storing, stir before use.
The substrate must be dry, solid, smooth and free from dust and grease. We recommend smoothing the concrete substrate with a suitable Kiilto low-alkali levelling compound, which reduces the risk of damage in the covering or adhesive due to excess alkaline moisture. Board joints must be smoothed as well. If installing covering on building boards, follow the board manufacturer's instructions.
Stir the adhesive before use, if needed, and apply with a fine notched trowel or a roller. On porous substrates, use the wet-gluing method: Press the covering immediately to the substrate and rub it onto the substrate firmly. If the covering is stiff or if it must be bended, let the adhesive permeate with air for 10–30 minutes before pressing the covering onto the substrate. If installing an impermeable covering on a totally non-absorbent substrate, let the adhesive permeate with air for more than 60 minutes before pressing the covering onto the surface. Or alternatively, rub the covering onto fresh adhesive, then lift up and let permeate with air for 20–30 minutes. After that rub the covering carefully onto the substrate. Remove fresh adhesive stains with water. Dried stains are removed with a strongly alkaline cleaner or xylene. Follow also the flooring manufacturer’s instructions on installation.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For more information on product and package disposal, visit www.kiilto.com.