• You can add products to your checklist.

By emailing the checklist to yourself, you will receive the Product Brochure and Safety Data Sheet to your inbox in PDF format.


Kiilto Combi Seinäliima

Adhesive for paper and dimensionally stable non-woven wallpapers as well as over-paintable fiber wallpapers in dry interior areas.

Special features

  • multi-purpose wall adhesive for paper wallpapers, non-woven and over-paintable fiber wallpapers
  • ready-mixed
  • removable with Kiilto Tapetinpoisto remover
  • very economical


Designed for dimensionally stable, non-woven paper wallpapers on absorbent or painted substrates. For both manual and machine application. Suitable also for use with the pre-soaking method with paper-backed wallpapers. Not for full plastic materials or plastic substrates. Complies with the M1 Emission Classification for Building Materials.


5–6 m²/l non-woven, 3–5 m²/l paper-backed with a pre-soaking method


PVAc dispersion and modified starch

Density/specific weight

approx. 1.05

Application temperature

+18–25 °C

Package sizes

1 l, 5 l, 10 l, 15 l

Substrate humidity

wood: 8–12 %, concrete: max. 3 % by weight or below 85 % RH

Frost resistance



5–6 m²/l non-woven, 3–5 m²/l paper-backed with a pre-soaking method


In unopened containers, above +1 °C, for 18 months. After long storing, stir before use. An opened container must be used within a month.

Instructions for use

Carry out work at normal room temperature. Both the wallpaper and paste should be allowed to acclimatise to the room temperature. The surface must be dry, even, firm and clean. Remove old wallpapers and loose paint. Smooth and sand any irregularities. Prime or pre-paste highly absorbent substrates. Use a damp-proof matt primer paint or an adhesive thinned 1:1 with water for priming. Wash painted surfaces with, for example, Kiilto Maalarinpesu (painter's cleaner) and rinse well.

Dimensionally stable, non-woven wallpapers do not swell with moisture and do not need pre-soaking. Apply paste with, e.g., a roller in an even layer to the wall or with a paste machine on the back of the wallpaper. Start from the ceiling line and press the wallpaper length with a rigid brush or plain spatula from the middle towards the edges to remove all bubbles. Avoid staining the wallpaper surface with the paste. Remove excess paste from the joints immediately with, e.g., a damp cloth or sponge. Vigorous rubbing may impair the colour or gloss of the wallpaper. Suitable also for paintable, dimensionally stable wallpapers and paper-backed wallpapers after pre-soaking. But not for meshy (fibreglass) woven materials. Provide effective ventilation in the work area. Follow primarily the wallpaper manufacturer's instructions.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit

M1LEEDMade in Finland, Key flag