You can add products to your checklist.
Water based adhesive for bonding borders and other wallpaper decorations in dry and damp areas.
For bonding borders and other wallpaper decorations in dry and damp areas. Suitable also for wallpaper lap joints. Has M1-emission classification for building products.
approx. 4–5 m²/l
|Package Size||500 ml|
EVA-dispersion and modified starch
Absorbent substrate 15-20 min. Note. Wet bonding! The amount of adhesive, substrate and prevailing conditions affect the working time considerably.
approx. 4–5 m²/l
In unopened containers, above +1°C, for 18 months. After prolonged storage, stir before use. A partly used container must be used within a month.
The subsurface can be wall plaster or construction board as well as paper and vinyl wallpapers. The surface must be dry, firm, clean and sufficiently even. Carry out work at usually prevailing room temperature. The wallpaper and adhesive should be allowed to reach the room temperature. Apply the adhesive with a brush or fine notched trowel all over the back of the border or decoration and press in place while the adhesive is still wet. On large areas it is advisable to apply the adhesive with, for example, a painter’s roller on the subsurface. Remove fresh adhesive stains immediately with a clean damp cloth or sponge. Ensure the washability of the materials. Vigorous rubbing may impair the surface, colour or gloss of delicate wallpapers.
Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.