Checklist

  • You can add products to your checklist.

By emailing the checklist to yourself, you will receive the Product Brochure and Safety Data Sheet to your inbox in PDF format.

SubmitPrint

Kiilto Akva Contact

A solvent-free, water-based contact adhesive designed for the gluing of floorings and wall coverings, various profiles and laths, foam plastics, laminate, cardboard, leather and fabric. Substitute for discontinued Kiilto Maitoliima.

Special features

  • water-based contact adhesive
  • strong bond

Application

Kiilto Akva Contact is a water-based contact adhesive designed for the gluing of floorings and wall coverings, various profiles and laths, foam plastics, laminate, cardboard, leather and fabric.

Coverage

3–4 m²/l (two-sided)

Package Size

EAN Code

3 l 6411511729030
Package Size 3 l
EAN Code 6411511729030
 

Type/binder

Polychloroprene rubber latex

Density/specific weight

0.94 kg/dm³

Touch dry

At room temperature approx. 30 min. Drying time depends on materials, adhesive amount and prevailing conditions.

Working time

2–4 h

Application temperature

Lowest +15 °C

Package sizes

1/3 l, 3 l

Substrate humidity

Before spreading the adhesive, ensure that the humidity of the concrete substrate does not exceed 85 %.

Coverage

3–4 m²/l (two-sided)

Storage

In unopened containers at +20 °C for 12 months.

Instructions for use

Apply the adhesive on dry, solid, even and clean surfaces. Apply the adhesive on both contact surfaces with a brush or plain spatula and wait until dry to touch. Press pieces together firmly: due to the initial tack of the adhesive being so high, the initial tack pieces should be positioned correctly before pressing. The joint is done, but reaches its final strength during the next few days.

Environment and safety

Avoid unnecessary skin contact and exposure with the fresh product, use safety gloves. Refer to material safety data sheet. For information on product and package disposal, visit www.kiilto.com.

M1LEEDMade in Finland, Key flag